Contact Us

Tel:+86-755-27540758

Fax:+86-755-27540748

Mob:+86-18025311762

E-mail: mars@jbsy-china.com

Add: No.35 Hong Xing Industrial Park, Song Ming Road, Songgang Town, Baoan District, Shenzhen, Guangdong China

Home > Products > China End Cap for carving machine and 3D printer manufacturers

China End Cap for carving machine and 3D printer manufacturers

  • Custom 1/4 Eccentric Spacers for 3D Printer

    Custom 1/4 Eccentric Spacers for 3D PrinterEccentric Spacers are the perfect solution for allowing you to adjust your V Wheels onto V-Slot. The Eccentric Spacers comes with a divot on the outside which allows you to know at all times where the smallest part of the offset hole is.This comes in handy. Part Details: Material:303 stainless...

  • ODM&OEM CNC XPRO V3 Controller Stepper Driver For 3D Printer

    ODM&OEM CNC XPRO V3 Controller Stepper Driver For 3D PrinterThe CNC xPro V3 Controller is a complete multi axis GRBL Controller. It is a specifically designed CNC Controller for applications that require precise motion control. The CNC xPro V3 is equipped with 4 embedded DRV8825 Stepper motor drivers capable of driving 4 small or large motors, this...

  • 3D Printer DIY Accessories Stepping Motor-Nema23

    3D Printer DIY Accessories Stepping Motor-Nema23The NEMA23 Stepper motors are ideally suited for 3D Printer, CNC Machines or any other machine. Specification: Shaft diameter: 1/4"(6.35mm) Torque: 175 oz-in Step Angle: 1.8° Holding torque: 14 kg-cm (190 oz-in) Peak current is 2.8A/phase Stepper diver input voltage 12-48V ※ Please...

  • CNC Machining Nema 23 Threaded Rod Plate for 3D Printer

    CNC Machining Nema 23 Threaded Rod Plate for 3D PrinterThe Nema23 Threaded Rod Plate. It can be used with V-Slot extrusion. This plate was designed for Nema 23 Stepper Motors and coupled with lead/acme screws for your machines.. 6063-T6 Aluminum Dimensions:72.5*80*3mmThick Black Anodized Finish

  • 3D Printer PLA Filament-1.75mm&3mm

    3D Printer PLA Filament-1.75mm&3mmPoly(lactic acid), a bio-based materials, it is Corn starch assembled, PLA material's advantages are no odor, lower melting point and good fluidity,environmental-protection,renewable,bio-degradation, low-shrink,good tenacity, high temperature stabilization, intensity good, no need to...

  • 3D Printer Accessories 6mm Width GT2 2mm Timing Belt

    3D Printer Accessories 6mm Width GT2 2mm Timing BeltGT2 2mm Timing Belt This GT2 2mm belt system works better than T5, T2.5, it gives better smoothness and accuracy of positioning, resulting in better printing quality.GT2 timing belt system especially suited for 3D printer. Part Details: • Material: Neoprene Rubber With Fiberglass Core • GT2 •...

  • DIY 3D Printer Parts Smooth Idler Pulley Wheel Kit

    DIY 3D Printer Parts Smooth Idler Pulley Wheel KitThe Smooth Idler Pulley Kit is an easy to assemble idler free wheel that can be used with Timing Belt up to 9mm wide! This idler pulley can be mounted in a variety of fashions to fit your design. It can be plate mounted as well as direct V-Slot mounted using a tee nut and a Slot Washer. Part...

  • V-Slot 2040 Linear Rail Aluminum Extrusion for DIY 3D Printer/CNC Machine

    V-Slot 2040 Linear Rail Aluminum Extrusion for DIY 3D Printer/CNC MachineV-Slot is a high quality extruded aluminum profile with a V groove on all 4 sides. This "V" groove provides extremely smooth and accurate linear motion. You will find that V-Slot is perfect for most projects.Nowadays V Slot aluminum extrusion is very popular for 3D printers, CNC...

  • Custom 12V 20A 250W Power Supply For 3D Printer

    Custom 12V 20A 250W Power Supply For 3D Printer12V 20A 250W power supply This 12V 250W Power supply, ideal for powering 3D Printers, CNC Machines and other electronics. Specifications: Rated power: 250W Output Current: 20A Output voltage: DC12V Built in cooling fan Dimensions: 200 x 110 x 50mm Features: Protection: Short circuit/Overload 8...

  • Aluminum V-Slot Gantry Plate for 3D Printer

    Aluminum V-Slot Gantry Plate for 3D PrinterThis V -Slot gantry plate it can be used with all sizes of V-Slot Extrusion and other systems, Fold through slots have been added to allow the timing belt to be easily folded back onto its self and clamped in place There are also 5mm slots which allow you to attach spacers for 90 degree belt...